Drawings are dimensioned from the published mechanical data. Product photography follows.
Integrated motion and barometric-altitude reference for OEM electronics and custom systems.
DXN-110 brings inertial motion sensing and a barometric-altitude reference to custom systems and OEM electronics. USB and SPI connectivity support integration with a host platform.
| Yaw range | ± 180° |
|---|---|
| Pitch range | ± 90° |
| Angular resolution | — |
| Heading accuracy (magnetic) | — |
| Pitch / roll accuracy (static) | — |
| Pitch / roll accuracy (dynamic) | — |
| Heave accuracy | — |
| Delayed heave accuracy | — |
| Measurement range | ±16 g |
|---|---|
| Stationary output | -0.085 to +0.085 g (typical +/-0.04 g) |
| Noise density | 0.13 typical, 0.23 max mg/sqrt(Hz) |
| Sensitivity | 0.488 mg/LSB (+/-3%; temp coefficient +/-0.024%/C; resolution 0.488 mg) |
| Sample rate | 100 Hz |
| Bandwidth | 66.6 Hz |
| Measurement range | ±2,000°/s |
|---|---|
| Stationary output | +/-2 deg/s typical |
| Noise density | 0.0038 typical, 0.011 max deg/s/sqrt(Hz) |
| Sensitivity | 0.07 deg/s/LSB (+/-3%; temp coefficient +/-0.048%/C; resolution 0.07 deg/s) |
| Sample rate | 100 Hz |
| Bandwidth | 52 Hz |
| Operating temperature | -40° to +85° C |
|---|
| Host interfaces | USB, SPI |
|---|
| Parameter | Rugged enclosure |
|---|---|
| Dimensions | 71.2 × 78.4 × 22.1 mm |
| Mass | — |
| Interface connector | 12-pin TE MULTILOCK 040 (174051-2) |
| Parameter | Rugged enclosure |
|---|---|
| Supply voltage | 3.3 V |
| Current draw | 40mA @ 5 V |
| Power | 220 mW |
| Parameter | Rugged enclosure |
|---|---|
| Nominal supply voltage | 3.3 V DC |
| Operating voltage range | 3.0 V to 3.6 V |
| Overvoltage protection | Transient clamping above 4 V (TVS diode); automatic load disconnect on sustained overvoltage |
| Overcurrent protection | 1 A resettable fuse (holds 1 A, trips at 2 A) |
| Fuse recovery | Self-resetting, no replacement needed |
| Reverse polarity protection | Included |
| Regulated output | 3.3 V via load switch with soft-start |
Documentation downloads are free with a DriveBotix account. Create one or sign in.
Need a drawing or interface detail that is not published yet? Ask technical support.
Send your mounting position, supply voltage and required output format. We will confirm compatibility and lead time.
Track orders, download invoices and keep your delivery details ready.
You can order as a guest, or sign in to keep your order history and addresses.
Guest orders can still be tracked by email, while an account keeps everything in one place.
